CALL TOLL FREE 1-888-886-6533

Find A Store   Contact Us   中文版

DOEPFER DARK Time 2x8 Step Analog Sequencer With Cv/gate,usb & Midi

DOEPFER DARK Time 2x8 Step Analog Sequencer With Cv/gate,usb & Midi
  • INCLUDES AC
SKU: 169264 Catalog #: DARK TIME



Vancouver Store
728 Granville St.
Vancouver, BC, V6Z 1E4
604-685-8471
  Contact Store Out Of Stock

Coquitlam Store
2560 Barnet Hwy.,
#116 Coquitlam, BC, V3H 1W3
604-941-8447
  Contact Store Out Of Stock

Langley Store
19638 Fraser Highway
Langley, BC, V3A 4C5
604-532-8303
  Contact Store Out Of Stock

North Vancouver Store
#800-801 Marine Drive
North Vancouver, BC, V7P 3K6
604-988-9974
  Contact Store Out Of Stock

Surrey Store
#157-10090 152nd Street
Surrey, BC, V3R 8X8
604-588-3200
  Contact Store Out Of Stock

Richmond Store
#150-3631 No. 3 Road
Richmond, BC, V6X 2B9
604-273-6661
  Contact Store Out Of Stock

Victoria Store
#105-2401D Millstream Road
Victoria, BC, V9B 3R5
250-383-5222
  Contact Store Out Of Stock

Nanaimo Store
#10-6894 Island Hwy. North
Nanaimo, BC, V9V 1P6
250-390-2626
  Contact Store Out Of Stock


Note: Stock availability may not be accurate, please contact your preferred location to confirm.

Description

Details

Dark Time is an 2 x8 steps analog sequencer with CV/Gate, USB and Midi interface. It is planned in the first place as an add-on for the Dark Energy but may be used even in combination with other Midi, USB or CV/Gate equipment too.

Features overview

  • two rows with 8 controls each
  • for each step:
    • - rotary control (same knob type as Dark Energy)
    • - red LED
    • - three-position switch On/Off/Skip
      • On = trigger signal is active for this step
      • Off = no trigger for this step
      • Skip = step is skipped
    • - three-position switch Stop/Continue/Jump
      • Stop = sequence stops here
      • Continue = sequence continues
      • Jump/Reset:
        • If only one of the 16 toggle switches is in the Jump position a Reset is carried out (i.e. sequence jumps to stage 1)
  • several operating modes:
    • 1x16 (i.e. the two rows are daisy-chained)
    • 2x8 (i.e. both rows run in parallel)
    • 1-8 Combi (lower row set individual gate lenght of the upper row)
  • several running directions:
    • forward
    • backward
    • random
    • CV scaling: 1V/Octave standard
    • several voltage / tuning ranges: 1V, 2V, 5V (corresponding to 1/2/5 octaves)
    • gate voltage 0/+5V (please refer to the remarks below concerning devices with S-Trigger or Korg MS10/MS20)
  • when quantization is "off" the resolution is still 10 bit (i.e. 1024 steps over the full rotating range of each potentiometer), from this the term "quantization off" is not fully correct, with quantization "on" the resolution is 13/25/61 steps for 1/2/5 octaves
  • transpose via switch (-1/0/+1 octave), Midi/USB or external CV input
  • timing control, selected by a three position switch:analog interface for CV/gate/clock/Start-Stop (inputs and outputs, 3.5 mm miniature jack sockets)Midi interface
    • internal via built-in clock oscillator with frequency and pulsewidth controls
    • external via Midi/USB
    • external via analog clock/start/stop
  • USB interface (power supply via USB is not possible)
  • optically adapted to Dark Energy (same knobs, same depth and height, same wooden side plates and so on)
  • Powered via external power supply (12V AC/min. 400mA) for 230V
  • powering the device via USB is not possible, because the analog circuits require a dual voltage (+/-12V).

 

Reviews

Write Your Own Review

You're reviewing: DOEPFER DARK Time 2x8 Step Analog Sequencer With Cv/gate,usb & Midi

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value
      Ask A Question!